Hyper-Lite Kits safe with BMW’s
new
ABS servo systems and CAN bus systems!!
We've put Hyper-Lite
brake enhancement kits on hundreds of BMWs with the new brake system,
and had several put through the mill by BMW techs. Hyper-Lite
kits DO NOT AFFECT THE NEW ABS SENSOR SYSTEMS IN ANY WAY. We're
just too danged efficient. Our 280
milliamp current draw is well under the amperage necessary to trigger
the
sensors.
The BMW CAN bus system uses 2.4 volts for the running light and 13.9
volts for the brake light. Since the 2.4 volts is too low to
activate our control flasher, we use the single CAN bus wire to
activate our LED brake lights, which act seamlessly with the bike's
system. Our running lights are activated by using a spare
accessory wire.
So if you are the proud owner of a new BMW do not
hesitate order your new Hyper-Lite kit. |
|
|
|
Universal Kits for all 12 Volt motorcycles
Work on any 12 volt system. Brake Light, Brake / Running Light, and Turn Signal kits |
|
|
Model Specific (Non BMW) Hyper-Lite Kits
Kits developed for various non-BMW bikes |
|
|
|
|
|