HYPER-LITE SEALED SWITCH MODULES
Switch Module
(1 switch)
$20.00
|
- Wires are on the back
- Industrial Strength Double-Stick Tape on bottom
- 1 switch 1.5" W x .75" H x .75" L
|
"Everytime I've added accessories I've looked for weatherproof switches that were compact. I usually ended up at an electronics store or marine
store and bought what they had. A lot of times they're imported junk and too big and then you had to buy a case for them.
Then the swearing started, "How in the *&#@* do you
mount these blankety-blank things?"
Now we've
got a great, compact unit that will mount about anywhere.
"Ok, that's nice but I need a switch that can handle more amperage. Got anything that'll work?"
Use a relay such as Grainger #5Z550 "Power Relay, 30 Amp, Single Pole, Single Throw, Normally Open, 12 Volt DC". Your local electronics or automotive parts store should have similar relays in stock. Bosch is a commonly stocked brand.
This way you are running only control amperage thru the switch (usually about 1 amp). You also can use smaller wire to the switch. Purchase a relay that is rated higher than the actual amperage you will need. For example a pair of 110 watt auxiliary lights will draw about 18 amps total so you need at least a 20 amp relay, etc. |
Universal
Hyper-Lite
Kits
BMW Hyper-Lites
|
